Concrete Moisture Meters

Regular checking of moisture content during the drying out period of a new concrete floor or floor screed is important to ensure it has reached sufficient dryness to accept the floor covering. Excess moisture in the concrete could cause latent problems such as condensation or failure of the adhesive under the floor covering.

  • TRAMEX CONCRETE ENCOUNTER MOISTURE METERTRAMEX CONCRETE ENCOUNTER MOISTURE METER
    The Concrete Encounter is a hand-held electronic moisture meter utilizes non-destructive impedance measurement for moisture determination. Parallel co-planer electrodes are mounted on the unit's base which transmit low-frequency signals into the concrete or cement floor to a depth of approx. 1/2 inch (12.5 mm). The results give the average moisture content to a depth of approximately 4 inches (100 mm) during the drying period.While concrete under normal conditions can never be completely dry, the instrument has been calibrated on acceptably dry material.
  • SAND AND GRAVEL MICROWAVE MOISTURE METERSAND AND GRAVEL MICROWAVE MOISTURE METER
    A microwave-technology based moisture meter for fast moisture content testing in sand and other fine and coarse aggregates.
    The Trident T-T-90 moisture meter utilizes the latest microwave and microprocessor technology to measure moisture content in various fine and coarse-grained materials. The prongs of the probe are inserted into the material to be tested and moisture content is instantaneously shown in the digital display.
  • CONCRETE ANALOG MOISTURE METER - WAGNERCONCRETE ANALOG MOISTURE METER - WAGNER
    The Wagner Moisture Meter provides a quick, initial indication of the moisture condition of concrete. You can determine if there’s no moisture evident, as well as pinpoint areas for possible further testing, if needed. Utilizing advanced RF technology, pin penetration is not needed, making your job much easier.
  • Concrete / Humidity Measurement Probe System Kit HM44Concrete / Humidity Measurement Probe System Kit HM44
    The Vaisala HUMICAP® Structural Humidity Measurement Kit HM44 provides a reliable and accurate method of measuring the drying out of construction materials.
  • Delmhorst ACCUSCAN Pin-less, Analog Moisture Meter
    Delmhorst’s superior quality and service have made their pin-type meters the most respected in the industry. Now, that same level of performance is available in the convenience of a pinless moisture meter. Use on wood, concrete, drywall and other building materials to pinpoint moisture up to 3/4" in depth. The easy-to-read analog readout displays percent moisture content in wood, and has a color-coded reference scale on non-wood materials. Affordably priced for a pinless meter, it can be invaluable to many tradesmen-home inspectors, contractors, pest control operators, EIFS inspectors, flooring installers, water restoration professionals and many more.
  • Delmhorst BD-2100 Digital Moisture Meter
    Digital display with separate scales for wood, plaster/concrete, and gypsum. Measures wood moisture content over the range of 6-40%. Reference scale provides relative moisture readings in non-wood materials. Averages up to 50 accumulated readings. Adjustable, audible set point alerts you when a pre-selected % moisture content has been reached. Green, yellow and red LEDs provide at a glance indication of moisture conditions. One of the industry favorites for testing EIFS (Exterior Insulated Finish System).
  • Mini Ligno Super Moisture Meter
    This compact rugged instrument is one of the most popular moisture meters used in the construction trades. Ideal for checking the dryness of lumber, veneer or fiberboard, in a shop, at home or in any industrial application.

The Moisture Meter Store
PO Box 5197
Janesville, WI 53547-5197
Toll Free Phone: 1-800-334-9291
International: 1-608-743-8002